ON-SITE
WOODEN FURNITURE REFURBISHMENT
& OFF-SITE REFINISHING

WOOD PROCESS

Oiled and finished wood furniture will be thoroughly cleaned, removing all dirt, grease, and grime using a solvent based chemical. Scratches, nicks and gouges will be stained as the wood will allow. We will then attempt to remove all food and moisture stains. Chipped and nicked wood will be filled as the wood will allow. Splintered edges will be sanded, stained,and finished. Some finished woods do not react to the above staining. Every attempt will be made to produce satisfactory results. A first coat of deep penetration oil treatment is then applied. Approximately two hours later, the surface is checked and if necessary, a second coat is then applied. Approximately one hour later, a third coat of oil maybe applied. Approximately one hour later, the surface is wiped and all residue is removed..

 

OFF-SITE REFINISHING Any wooden furniture that does not respond to the on-site refurbishing process must be removed and brought to our workshop for the purpose of complete stripping, sanding, and refinishing. Separate pricing shall be quoted for this process. Also includes pickup and redelivery.